The ultrasonic microphone built into the Song Meter Mini Bat (generations 1 and 2) has a permanent high-pass filter (HPF) with a cutoff frequency of 8.25 kHz. An HPF is a filter designed to remove incoming signals below its cutoff frequency. In the case of the Song Meter Mini Bat, the purpose of the HPF is to prevent low-frequency sounds like wind from distorting your recordings or excessively triggering the recorder.

Most filters take effect gradually as frequency changes. In the case of the Song Meter Mini Bat, for each factor of 2 below the cutoff frequency, sound at that frequency is reduced in volume by 12 dB compared to sound above the cutoff frequency. For example, sound at 4.13 kHz is reduced by 12 dB, and sound at 2.06 kHz is reduced by 24 dB.

You should only expect to record sound as low as approximately 8 kHz, but you may still see slightly lower-frequency sounds recorded if they are particularly loud.

If want to consistently record lower-frequency sound, you should install an acoustic stub microphone on your Song Meter Mini Bat and schedule the recorder for acoustic recording.

• What is the lowest frequency the Song Meter SM4BAT FS can record?
• Why can't I use an adapter to connect a USB-C Echo Meter Touch to my Lightning iOS device?
• What type of data port does my phone or tablet have?
• What iOS devices are compatible with my Echo Meter Touch module?
• Can I use Echo Meter Touch modules with USB connectors with iOS devices?
• What adapter do I need for my Echo Meter Touch module and Android or iOS device?
• What type of plug does my Echo Meter Touch module have?
• How do I update the firmware on my Echo Meter Touch module with USB to add iOS compatibility?
• Are there acoustic differences between the first- and second-generation Mini Bat recorders?
• Will the Lithium-ion lids I used with first-generation Minis fit the new models?
• Will the security bracket accessory I use with first-generation Minis be compatible with the new models?
• Will Wildlife Acoustics continue to repair and support first-generation Minis with replacement parts?
• View more questions